Click here for information about delivery charges

Calico Craft Parts Special Offers

Recently Viewed

Christmas Posting Dates 2024 - Calico Craft Parts

Birch Ply or MDF Lantern Kit - Small

Our Price:  £3.50Earn 3 Loyalty Points
+
  
  
Add Perspex Windows?  
  

Code:  MDFBPLANT02-E-3mmMDF


This easy to assemble lantern kit is just the right size to dot around and is available in birch plywood which makes a lovely gift or MDF which is ideal for altering. You also have the choice of plain or engraved which comes with cut outs and engraved snowflake detailing. 

Each kit comes with a hanging loop so you can hang lanterns from hooks, pegs, cupboard or door knobs. Add raffia or ribbon, additional craft parts, foliage, flowers and paint effects to create unique pieces.  This versatile kit can also be popped on a shelf or mantlepiece, windowsill and other wee nooks!

Optional candle hole can be used to insert a battery operated candle. If you intend to decorate more of the base, leave this unchecked.

Add a set of 6 cut to size perspex sheets that pop into the insides of the window frames before you complete final assembly. Leave plain for glass effect or decorate further with leading effects etc. 

ASSEMBLY INSTRUCTIONS: This easy to assemble kit consists of a base plate into which you slot the 6 sides. Add the roof piece. Slot in the roof struts and hanging hole, then pop on the roof panels - job done!

This slot together kit is laser cut in a choice of 3mm MDF or 3mm birch plywood.  Once assembled, measurements are approx: 

140mm tall overall
Base - 74mm x 85mm at widest points
Side pieces - 77mm tall from base to roof piece x 40mm wide 
Roof pieces - 46mm long from base of hanging loop to roof piece 
Hanging Loop - 25mm tall from tip of roof x 18mm wide 
Openings - 48mm tall x 29mm wide

HINT: Keep the slots and tabs clear of any paints or other layers to ensure an easy fit.  Use a good quality wood glue and wipe away any drips with a damp cloth before the glue sets.

Our products are proudly manufactured in our own UK workshop. We don't use fancy packaging or branding, you just pay for the products and we hope you'll enjoy using them.  Here's more about what we use with some hints and tips:

MDF WOOD (2mm and 3mm) shapes and embellishments need little or no further enhancement if you like the vintage look. Use inks and crackle glazes to enhance this further without altering the base colour. They are also ideal for gilding, staining and painting. Larger pieces can also be stamped, collaged, crackled and more - see how it's done over at the Design Team Blog!

PLEASE NOTE:  Laser cutting will leave some sooty residue on the back of MDF pieces although we take steps to minimise this as much as possible - it can be more pronounced the smaller/more intricate the design. This is not a defect and will not affect the end use of the product as it's on the back.

Intricate designs in smaller sizes and some of the mini shapes will be much darker than other products, particularly when using 2mm MDF.  This is due to the laser process that cuts the substrate by precision burning and there is nothing we can do about this. The edges of laser cut items will also always be darker for the same reason.  It is only by laser cutting (rather than stamping or routing) that intricate designs can be made.

If you like the designs or prefer the smaller sizes but don't like the dark finish, you can lift it with colour washing, dry brushing or using diluted gesso to make the design pop.  See some project ideas on the blog!

 

BIRCH PLYWOOD (3mm) has a naturally light coloured birch wood top and bottom layer which is suitable for staining, painting, waxing or burning with a pyrography tool. All birch plywood plaques come ready sanded for your convenience - plaques over 100mm are also fine sanded.  Depending on availability, we may from time to time (but rarely) need to substitute with light birch plywood or poplar plywood - this does not significantly affect the appearance of the product and has no effect on its end use.

 

HOT OFF THE PRESS!! As our products are freshly cut to order and packed soon thereafter, you may sometimes notice a smell that is caused by the intense heat of the laser beam burning through the substrate.  All substrates contains glues or binding agents in their manufacture (particularly MDF) and the intense heat of the laser beam can create this aroma. It won't be very noticeable (if at all) on larger products such as plaques/mixed media boards etc but may be more noticeable on fiddly and/or engraved designs where the laser cutting is more concentrated.

Some people are more sensitive to the smell than others, some people say it smells a bit fishy or of burnt wood, some people enjoy the smell, some don't notice anything at all and some people dislike it. The best we can do is advise you prior to purchase that this may occur so you can make an informed choice - as this is part of the manufacturing process, it is not considered a defect in the products.  Once your order is unpacked and aired for a bit, any lingering odour should fade - if you prefer, you can also seal items with a clear sealer, such as Mod Podge, before use.

 

WE RECOMMEND: Use a good quality wood or PVA glue when using our products for best results - apply a thin coating across the back of the piece, allow to dry for a few minutes, then stick down pressing evenly.  We highly recommend DecoArt paints, mediums, glues and finishes for tried and tested results with our products.

If you've enjoyed these splendid projects, make sure you visit our Blog which is a searchable Library of Ideas! Filled with projects in every style and season, lots of step by step instructions, how to use paints and mediums as well as infinite inspiration on how to use Calico Craft Parts in your projects... 

Here's a snippet of the latest posts (click any image to see more) or go straight to the Blog Home Page

SERVICE PRICE   APPROX. DELIVERY TIME
UK 1st Class £3.50 Flat Rate Delivery approx 1 - 2 days following dispatch
UK 2nd Class £2.50 Flat Rate Delivery approx 3 - 5 days following dispatch
FREE DELIVERY No charge on UK orders £25+ UK Orders £25+ Sent by the most cost effective method according to weight/value of order - allow up to 5 days following dispatch
INTERNATIONAL

Varies - prices start at £4.50

Based on order value

Royal Mail International Airmail Standard**

 

We ship to all locations with a UK postcode.  We also ship internationally to Europe, USA, Canada, Australia and New Zealand.  For more information and detailed charges, CLICK HERE.

As we manufacture all our products in house, it is not possible to offer a next day service automatically through checkout.  The majority of orders are dispatched within 1 to 3 days (allow up to 5 days during the lead up to Christmas). If you require your order in a rush, please Contact Us and we'll let you know if we can accommodate.  Additional shipping charges will apply.

**Certain high weight products (such as large kits, i.e the Dalek or Steampunk Train) are restricted to UK destinations when ordering online.  If you wish to order these kits for international delivery, please contact us prior to ordering to arrange the most suitable shipping method.

Multiples of kits or mixed media boards will be sent International Economy unless you request otherwise - additional charges will apply.  Delivery times can vary according to destination, this service is often surprisingly quick, but you should allow up to 6 weeks to be safe. 


YOU MAY ALSO LIKE...
Birch Ply or MDF Lantern Kit - Medium

Birch Ply or MDF Lantern Kit - Medium£3.99  -  £6.99

Birch Ply or MDF Sled Kit

Birch Ply or MDF Sled Kit£2.99  -  £3.99

Birch Ply or MDF Gingerbread Cottage Kit

Birch Ply or MDF Gingerbread Cottage Kit£16.99  -  £22.99

Birch Ply or MDF Miniature Fireplace Kit*

Birch Ply or MDF Miniature Fireplace Kit*£4.80  -  £10.40

Sheet of Mini MDF Street Lamps

Sheet of Mini MDF Street Lamps£3.00  -  £6.90

Calico Craft Parts
Buy quality wood shapes from Calico Craft Parts