Click here for information about delivery charges

Recently Viewed

Shadow Box Frame Kit - Rectangle

Our Price:  £3.00Earn 3 Loyalty Points


MULTI-BUY SAVINGS:  Discounts of 5%, 10% and 15% are available when you order 5, 10 and 15 items or more of this product.

Rectangle birch plywood shadow box frame kit comes with all the parts needed and is ready to assemble.  Birch plywood parts come ready sanded for your convenience and the kit comes with a perspex window.

Laser cut from 3mm double faced birch plywood, our rectangle shadow box kits are available in the following sizes:

  • Small - Box: 100mm x 150mm x 40mm deep internally (47mm overall with frame) Frame: 180mm x 120mm with a 140mm x 80mm opening
  • Medium - Box: 200mm x 150mm x 40mm deep internally (47mm overall with frame) Frame: 230mm x 180mm with a 190mm x 140mm opening
  • Large - Box: 250mm x 200mm x 40mm deep internally (47mm overall with frame) Frame: 280mm x 230mm with a 240mm x 190mm opening

As this is a flat pack kit, any decoration can be done before assembly which makes painting or lining with paper much easier.  If you do decorate, remember to keep the joints clear of paint or you may not get a good fit. Birch plywood can be left plain and simply varnished or waxed to resist finger marks.

For best results use a good quality wood glue - you may find low tack masking tape handy to hold things together while the glue sets.  Wipe away any oozes around joints with a damp cloth while still wet.

PLEASE NOTE: - peel off the protective film covering the perspex sheet before use. If you think the perspex is scratched or has black edges, chances are you haven't peeled the film off.  Once removed, you should have a clear glass like sheet.

To open and print step by step assembly instructions, just click on the PDF logo (opens in a new window)




Calico Craft Parts products are proudly manufactured in our own UK workshop. We don't use fancy packaging or branding, you just pay for the product and we hope you'll enjoy using them.  Here's more about what we use with some hints and tips:

MDF wood (2mm) shapes and embellishments need little or no further enhancement if you like the vintage look. Use inks and crackle glazes to enhance this further without altering the base colour. They are also ideal for gilding, staining and painting. Larger pieces can also be stamped, collaged, crackled and more - see how it's done over at the Design Team Blog!

Birch plywood (3mm) has a naturally light coloured birch wood top and bottom layer which is suitable for staining, painting, waxing or burning with a pyrography tool. All birch plywood plaques come ready sanded for your convenience - plaques over 100mm are also fine sanded.  Depending on availability, we may from time to time (but rarely) need to substitute with light birch plywood or poplar plywood - this does not significantly affect the appearance of the product and has no effect on its end use.

PLEASE NOTE:  Laser cutting may leave some sooty residue on the back of MDF pieces although we take steps to minimise this as much as possible - it can be more pronounced the more fiddly the design. This is not a defect and will not affect the end use of the product as it's on the back. As our products are freshly cut to order, you may also notice a slight burnt aroma (caused by the heat of the laser cutting process) which will fade once your order has been unpacked and the pieces have aired for a bit. You can also seal them with a clear sealer, such as Mod Podge, before use if needed.

WE RECOMMEND: Use a good quality wood or PVA glue when using our products for best results - apply a thin coating across the back of the piece, allow to dry for a few minutes, then stick down pressing firmly and evenly.  We highly recommend DecoArt paints, mediums, glues and finishes for tried and tested results with our products.

If you've enjoyed these splendid project ideas by our Design Team, make sure you visit our Blog! Updated several times a week, you'll find all the latest projects using Calico Craft Parts by our talented ladies and many guest designers... inspiration, hints and tips and many projects with step by step instructions.

Here's a snippet of the latest posts (click any image to see more) or go straight to the Blog Home Page

UK 1st Class £3.50 Flat Rate Delivery approx 1 - 2 days following dispatch
UK 2nd Class £2.50 Flat Rate Delivery approx 3 - 5 days following dispatch
FREE DELIVERY No charge on UK orders £25+ UK Orders £25+ Sent by the most cost effective method according to weight/value of order - allow up to 5 days following dispatch

Varies - prices start at £4.50

Based on order value

Royal Mail International Airmail Standard


We ship to all locations with a UK postcode.  We also ship internationally to Europe, USA, Canada, Australia and New Zealand.  For more information and detailed charges, CLICK HERE.

As we manufacture all our products in house, it is not possible to offer a next day service automatically through checkout.  The majority of orders are dispatched within 1 to 3 days (allow up to 5 days during the lead up to Christmas). If you require your order in a rush, please Contact Us and we'll let you know if we can accommodate.  Additional shipping charges will apply.

Shadow Box Frame Kit - Square

Shadow Box Frame Kit - Square£3.50  -  £9.00

Birch Plywood Box Kits - Rectangle

Birch Plywood Box Kits - Rectangle£2.00  -  £8.00

Birch Plywood Box Stack Kits - Rectangle

Birch Plywood Box Stack Kits - Rectangle£7.65  -  £24.75

Birch Plywood Box Kits - Square

Birch Plywood Box Kits - Square£2.30  -  £8.50

Birch Plywood Box Stack Kits - Square

Birch Plywood Box Stack Kits - Square£8.10  -  £26.55

Birch Plywood Drop Box Slider Kit

Birch Plywood Drop Box Slider Kit£6.50  -  £7.99

Birch Ply & MDF ATC/Tag Storage Boxes

Birch Ply & MDF ATC/Tag Storage Boxes£3.65  -  £4.50

Birch Ply & MDF ATC/Tag Display Boxes

Birch Ply & MDF ATC/Tag Display Boxes£1.60  -  £4.00

Calico Craft Parts
Buy quality wood shapes from Calico Craft Parts