Dreaming of A White Christmas - MDF Wood Scene

This beautiful Winter scene can be used to create mixed media panels, scrapbook layouts, plaques and more! Features snow laden trees on a swirly snow bank, "I'm Dreaming of a White Christmas" letter and thick, falling snow!

Ideal for framing or using in shadow boxes as a complete set, or use individual elements to create an assortment of projects, gifts or home decorations. Laser cut from 3mm MDF, all elements come in a flat sheet, pop the pieces out to use. Available in 3 larger sizes - select your choice from the options above. 

Measurements as follows:

Medium Set - panel measures 180mm square - Winter tree element measures 140mm tall x 177mm wide - the word "White" with swirl measures 62mm tall x 109mm wide as cut

Large Set - panel measures 240mm square - Winter tree element measures 186mm tall x 236mm wide - the word "White" with swirl measures 83mm tall x 146mm wide as cut

X-Large Set - panel measures 280mm square - Winter tree element measures 217mm tall x 275mm wide - the word "White" with swirl measures 97mm tall x 170mm wide as cut

PLEASE NOTE: This design has delicate parts - handle with care (or tweezers!) to prevent damage.

Our laser cut MDF wood shapes add the finishing touch without weight or bulk to surfaces, plaques, frames, papercraft projects and more! As these are MDF rather than chipboard, they add a natural finish to your projects and require no or minimal embellishment - but you can still go in with the gilt wax, paints, stains and inks to create endless variations to suit!

Calico Craft Parts products are proudly manufactured in our own UK workshop. We don't use fancy packaging or branding, you just pay for the product and we hope you'll enjoy using them.  Here's more about what we use with some hints and tips:

MDF wood (2mm) shapes and embellishments need little or no further enhancement if you like the vintage look. Use inks and crackle glazes to enhance this further without altering the base colour. They are also ideal for gilding, staining and painting. Larger pieces can also be stamped, collaged, crackled and more - see how it's done over at the Design Team Blog!

Birch plywood (3mm) has a naturally light coloured birch wood top and bottom layer which is suitable for staining, painting, waxing or burning with a pyrography tool. All birch plywood plaques come ready sanded for your convenience - plaques over 100mm are also fine sanded.  Depending on availability, we may from time to time (but rarely) need to substitute with light birch plywood or poplar plywood - this does not significantly affect the appearance of the product and has no effect on its end use.

PLEASE NOTE:  Laser cutting may leave some sooty residue on the back of MDF pieces although we take steps to minimise this as much as possible - it can be more pronounced the more fiddly the design. This is not a defect and will not affect the end use of the product as it's on the back. As our products are freshly cut to order, you may also notice a slight burnt aroma (caused by the heat of the laser cutting process) which will fade once your order has been unpacked and the pieces have aired for a bit. You can also seal them with a clear sealer, such as Mod Podge, before use if needed.

WE RECOMMEND: Use a good quality wood or PVA glue when using our products for best results - apply a thin coating across the back of the piece, allow to dry for a few minutes, then stick down pressing firmly and evenly.  We highly recommend DecoArt paints, mediums, glues and finishes for tried and tested results with our products.

If you've enjoyed these splendid project ideas by our Design Team, make sure you visit our Blog! Updated several times a week, you'll find all the latest projects using Calico Craft Parts by our talented ladies and many guest designers... inspiration, hints and tips and many projects with step by step instructions.

Here's a snippet of the latest posts (click any image to see more) or go straight to the Blog Home Page

We ship to all locations with a UK postcode.  We also ship internationally to Europe, USA, Canada, Australia and New Zealand.  For more information and detailed charges, CLICK HERE.

As we manufacture all our products in house, it is not possible to offer a next day service automatically through checkout.  The majority of orders are dispatched within 1 to 3 days (allow up to 5 days during the lead up to Christmas). If you require your order in a rush, please Contact Us and we'll let you know if we can accommodate.  Additional shipping charges will apply.

**Certain high weight products (such as large kits, i.e the Dalek or Steampunk Train), or multiples of kits or large plaques will be sent International Economy unless you request otherwise - additional charges will apply.  Delivery times can vary according to destination, this service is often surprisingly quick, but you should allow up to 6 weeks to be safe.