Click here for information about delivery charges

Recently Viewed

Personalised Christmas Box - Birch Plywood

Our Price:  £14.99Earn 14 Loyalty Points

Code:  BPXMAS3D03



Create a personalised keepsake that can be used for many years to come - fill with Christmas comforts and treats and as the children grow, it makes a lovely Christmas memory box. This easy to assemble box kit comes with a personalised frame sprinkled with snowflakes and classic Christmas motifs.

Laser cut from 3.2mm birch plywood, box measures approx 290mm x 200mm x 203mm (approx 11.4" x 7.9" x 8") once fully assembled.  Also available in MDF suitable for painting and altering. 

Birch plywood can be left natural (you may wish to use clear wax or varnish to protect against stains and finger marks) or it can be stained, painted and further embellished.  This kit comes pre-sanded for your convenience so you can get started straight away. Being flat pack, this makes decorating SO much easier especially if you wish to line or cover the box with papers or mixed media effects.

HINT: Keep the slots and tabs clear of any paints or other layers to ensure an easy fit.  Use a good quality wood glue and wipe away any drips with a damp cloth before the glue sets.

CHILD'S NAME will be centralised in all upper case letters as shown on the photograph, with snowflakes and motifs sprinkled as appropriate to keep the piece in balance.

OPTIONAL: Two names on one box, such as Luke & Lucy's, Sally & Michael's, (Mum & Dad's!) etc.


PLEASE NOTE: Personalised products cannot be returned unless there is a defect in manufacturing, so please double check your spelling before submitting your order.

Calico Craft Parts products are proudly manufactured in our own UK workshop. We don't use fancy packaging or branding, you just pay for the product and we hope you'll enjoy using them.  Here's more about what we use with some hints and tips:

MDF wood (2mm) shapes and embellishments need little or no further enhancement if you like the vintage look. Use inks and crackle glazes to enhance this further without altering the base colour. They are also ideal for gilding, staining and painting. Larger pieces can also be stamped, collaged, crackled and more - see how it's done over at the Design Team Blog!

Birch plywood (3mm) has a naturally light coloured birch wood top and bottom layer which is suitable for staining, painting, waxing or burning with a pyrography tool. All birch plywood plaques come ready sanded for your convenience - plaques over 100mm are also fine sanded.  Depending on availability, we may from time to time (but rarely) need to substitute with light birch plywood or poplar plywood - this does not significantly affect the appearance of the product and has no effect on its end use.

PLEASE NOTE:  Laser cutting may leave some sooty residue on the back of MDF pieces although we take steps to minimise this as much as possible - it can be more pronounced the more fiddly the design. This is not a defect and will not affect the end use of the product as it's on the back. As our products are freshly cut to order, you may also notice a slight burnt aroma (caused by the heat of the laser cutting process) which will fade once your order has been unpacked and the pieces have aired for a bit. You can also seal them with a clear sealer, such as Mod Podge, before use if needed.

WE RECOMMEND: Use a good quality wood or PVA glue when using our products for best results - apply a thin coating across the back of the piece, allow to dry for a few minutes, then stick down pressing firmly and evenly.  We highly recommend DecoArt paints, mediums, glues and finishes for tried and tested results with our products.

If you've enjoyed these splendid project ideas by our Design Team, make sure you visit our Blog! Updated several times a week, you'll find all the latest projects using Calico Craft Parts by our talented ladies and many guest designers... inspiration, hints and tips and many projects with step by step instructions.

Here's a snippet of the latest posts (click any image to see more) or go straight to the Blog Home Page

UK 1st Class £3.50 Flat Rate Delivery approx 1 - 2 days following dispatch
UK 2nd Class £2.50 Flat Rate Delivery approx 3 - 5 days following dispatch
FREE DELIVERY No charge on UK orders £25+ UK Orders £25+ Sent by the most cost effective method according to weight/value of order - allow up to 5 days following dispatch

Varies - prices start at £4.50

Based on order value

Royal Mail International Airmail Standard**


We ship to all locations with a UK postcode.  We also ship internationally to Europe, USA, Canada, Australia and New Zealand.  For more information and detailed charges, CLICK HERE.

As we manufacture all our products in house, it is not possible to offer a next day service automatically through checkout.  The majority of orders are dispatched within 1 to 3 days (allow up to 5 days during the lead up to Christmas). If you require your order in a rush, please Contact Us and we'll let you know if we can accommodate.  Additional shipping charges will apply.

**Certain high weight products (such as large kits, i.e the Dalek or Steampunk Train) are restricted to UK destinations when ordering online.  If you wish to order these kits for international delivery, please contact us prior to ordering to arrange the most suitable shipping method.

Multiples of kits or mixed media boards will be sent International Economy unless you request otherwise - additional charges will apply.  Delivery times can vary according to destination, this service is often surprisingly quick, but you should allow up to 6 weeks to be safe. 

Christmas At - Personalised Plaque

Christmas At - Personalised Plaque£6.99  -  £12.99

Christmas At The - Personalised Plaque

Christmas At The - Personalised Plaque£6.99  -  £12.99

Our House Believes - Christmas Plaque

Our House Believes - Christmas Plaque£4.99  -  £9.99

Calico Craft Parts
Buy quality wood shapes from Calico Craft Parts