Home > Halloween & Autumn Wood Shapes > Halloween Minis & Add on Sheets
(Details shown apply to the default selection)
A versatile assortment of zombie arms and boots, ready to claw their way into or out of your projects! Ideal for Halloween and horror themed projects. Mix and match on a variety of papercrafts, plaques or any flat craft surface.
Sheets are available in 3 sizes and each sheet contains 22 individual elements, enough to complete or embellish several projects - select your choice from the options above. Measurements as follows:
Small sheet measures 120mm x 120mm overall - central zombie arm (largest shape) 38mm x 34mm - boot with leg bone (smallest shape) 20mm x 12mm
Medium sheet measures 180mm x 180mm overall - central zombie arm (largest shape) 58mm x 52mm - boot with leg bone (smallest shape) 30mm x 18mm
Large sheet measures 240mm x 240mm overall - central zombie arm (largest shape) 77mm x 69mm - boot with leg bone (smallest shape) 40mm x 24mm
Our laser cut MDF wood shapes add the finishing touch without weight or bulk to surfaces, plaques, frames, papercraft projects and more! As these are MDF rather than chipboard, they add a natural finish to your projects and require no or minimal embellishment - but you can still go in with the gilt wax, paints, stains and inks to create endless variations to suit!
Calico Craft Parts products are proudly manufactured in our own UK workshop. We don't use fancy packaging or branding, you just pay for the product and we hope you'll enjoy using them. Here's more about what we use with some hints and tips:
MDF wood (2mm) shapes and embellishments need little or no further enhancement if you like the vintage look. Use inks and crackle glazes to enhance this further without altering the base colour. They are also ideal for gilding, staining and painting. Larger pieces can also be stamped, collaged, crackled and more - see how it's done over at the Design Team Blog!
Birch plywood (3mm) has a naturally light coloured birch wood top and bottom layer which is suitable for staining, painting, waxing or burning with a pyrography tool. All birch plywood plaques come ready sanded for your convenience - plaques over 100mm are also fine sanded. Depending on availability, we may from time to time (but rarely) need to substitute with light birch plywood or poplar plywood - this does not significantly affect the appearance of the product and has no effect on its end use.
PLEASE NOTE: Laser cutting may leave some sooty residue on the back of MDF pieces although we take steps to minimise this as much as possible - it can be more pronounced the more fiddly the design. This is not a defect and will not affect the end use of the product as it's on the back. As our products are freshly cut to order, you may also notice a slight burnt aroma (caused by the heat of the laser cutting process) which will fade once your order has been unpacked and the pieces have aired for a bit. You can also seal them with a clear sealer, such as Mod Podge, before use if needed.
WE RECOMMEND: Use a good quality wood or PVA glue when using our products for best results - apply a thin coating across the back of the piece, allow to dry for a few minutes, then stick down pressing firmly and evenly. We highly recommend DecoArt paints, mediums, glues and finishes for tried and tested results with our products.
If you've enjoyed these splendid project ideas by our Design Team, make sure you visit our Blog! Updated several times a week, you'll find all the latest projects using Calico Craft Parts by our talented ladies and many guest designers... inspiration, hints and tips and many projects with step by step instructions.
Here's a snippet of the latest posts (click any image to see more) or go straight to the Blog Home Page
Varies - prices start at £4.50
Royal Mail International Airmail Standard**
We ship to all locations with a UK postcode. We also ship internationally to Europe, USA, Canada, Australia and New Zealand. For more information and detailed charges, CLICK HERE.
As we manufacture all our products in house, it is not possible to offer a next day service automatically through checkout. The majority of orders are dispatched within 1 to 3 days (allow up to 5 days during the lead up to Christmas). If you require your order in a rush, please Contact Us and we'll let you know if we can accommodate. Additional shipping charges will apply.
**Certain high weight products (such as large kits, i.e the Dalek or Steampunk Train), or multiples of kits or large plaques will be sent International Economy unless you request otherwise - additional charges will apply. Delivery times can vary according to destination, this service is often surprisingly quick, but you should allow up to 6 weeks to be safe.
Skulls, Brains & Eyeballs - MDF Add On Sheet£3.99 - £7.99
Zombie Horde - MDF Wood Shape£1.35 - £2.00
Zombies - Sheet of Halloween Mini Wood Shapes£2.99
Zombie MDF Wood Shape - Style 1£0.30 - £0.80
Zombie MDF Wood Shape - Style 2£0.30 - £0.80
Zombie MDF Wood Shape - Style 3£0.30 - £0.80
Zombie MDF Wood Shape - Style 4£0.30 - £0.80
Zombie MDF Wood Shape - Style 5£0.30 - £0.80
Information & Help