Sheet of Mini MDF Wood Cogs - Style 12

Laser cut MDF wood cog shapes (style 12) are ready to alter, paint and embellish - ideal for steampunk, grunge or industrial projects. Simply pop them out of the backing sheet and off you go - you can even use the backing sheet as a mask or template for other projects.

Each cog is cut from 2mm MDF and each sheet contains 5 different sizes, 29 cogs per sheet.  Sheets are available in 3 sizes - select your choice from the options above.  Measurements as follows (all approx):

Small sheet measures 148mm x 105mm overall and contains the following sizes:

1 x 43mm    
2 x 32mm    
4 x 27mm     
6 x 22mm     
16 x 16mm

Medium sheet measures 222mm x 157mm overall and contains the following sizes:

1 x 64mm    
2 x 48mm    
4 x 40mm     
6 x 32mm     
16 x 24mm

Large sheet measures 297mm x 210mm overall and contains the following sizes:

1 x 86mm    
2 x 64mm    
4 x 54mm     
6 x 43mm     
16 x 32mm

Our laser cut MDF wood shapes add the finishing touch without weight or bulk to surfaces, plaques, frames, papercraft projects and more! As these are MDF rather than chipboard, they add a natural finish to your projects and require no or minimal embellishment - but you can still go in with the gilt wax, paints, stains and inks to create endless variations to suit!

Calico Craft Parts products are proudly manufactured in our own UK workshop! We do not use fancy packaging or branding, you just pay for the product.

MDF wood embellishments need little or no further enhancement but can be gilded, inked, stained, crackled, painted, stamped, collaged and more.  They have a natural vintage look which many customers enjoy unadorned!

Birch plywood has a naturally light coloured birch wood top layer which is suitable for staining, painting, waxing or burning with a pyrography tool. All birch plywood plaques come ready sanded for your convenience. Depending on availability, we may from time to time need to substitute with light birch plywood or poplar plywood - this does not significantly affect the appearance of the product and has no effect on its end use.

PLEASE NOTE:  Laser cutting may leave some sooty residue on the product although we take steps to minimise this as much as possible - this is not a defect and will not affect the end use of the product - wipe away with a brush or damp cloth if needed.  As our products are freshly cut to order, you may also notice a slight burnt aroma (caused by the heat of the laser cutting process) which will fade and not be noticeable once your order has been unpacked and the pieces have aired.

WE RECOMMEND: Use a good quality wood or PVA glue when using our products for best results - apply a thin coating across the back of the piece, allow to dry for a few minutes, then stick down pressing firmly and evenly.  We highly recommend DecoArt paints, mediums, glues and finishes for tried and tested results with our products.

If you've enjoyed these splendid project ideas by our Design Team, make sure you visit our Blog! Updated several times a week, you'll find all the latest projects using Calico Craft Parts by our talented ladies and many guest designers... inspiration, hints and tips and many projects with step by step instructions.

Here's a snippet of the latest posts (click any image to see more) or go straight to the Blog Home Page

We ship to all locations with a UK postcode.  We also ship internationally to Europe, USA, Canada, Australia and New Zealand.  For more information and detailed charges, CLICK HERE.

As we manufacture all our products in house, it is not possible to offer a next day service automatically through checkout.  The majority of orders are dispatched within 1 to 3 days (allow up to 5 days during the lead up to Christmas). If you require your order in a rush, please Contact Us and we'll let you know if we can accommodate.  Additional shipping charges will apply.